Product Products

The rear of the board car is open to the rear panel

3N-15B/3N-20B
Contact Us

SanNeng car tail board is a kind of cantilever loading and unloading device, which is installed in trucks and all kinds of airtight vehicle tail, is about 300 to 600 kg of lift platform, based on on-board battery powered hydraulic lifting handling equipment. It has all the functions of loading and unloading of motor forklifts, and all the motors, valves, high-pressure pumps, oil cylinders, lifting devices and control switches on the forklift. It can greatly improve the efficiency of transportation and handling, and the three-energy tail plate is one of the necessary equipment for modern logistics transportation. It has all the functions of loading and unloading of motor forklifts, and all the motors, valves, high-pressure pumps, oil cylinders, lifting devices and control switches on the forklift. It can greatly improve the efficiency of transportation and handling, and the three-energy tail plate is one of the equipment of modern logistics transportation.

Will greatly enhance the efficiency of loading and unloading a 8 tons car full of goods, if use human handling, you need to 5-8 small, if use SanNeng tail board need only half an hour, and personnel to save 80%, save personnel salary of half an year can buy a transom.

The three-energy tail board has the following characteristics:

1. Nickel-plated piston and dust jacket are used for hydraulic cylinder.

2. Hydraulic station internal flow control valve, adjustable lifting and turnover speed.

3. There are three protection switches built in, which can effectively avoid the burning of the circuit or motor when the automobile circuit is short circuit, the battery voltage is low or the current is too large, the tail plate is overloaded, etc.

4. The hydraulic cylinder can be built according to the requirement of the customer to have the explosion-proof safety valve, which can prevent the tail plate and cargo damage caused by the blowout of the tubing.

5. All of them are equipped with anti-collision bar to separate the tailboard and the rear door of the car, so as to avoid the damage caused by the long collision of the rear door.

6. The three - energy stern board all oil cylinder adopts the thickened oil cylinder, the oil cylinder is strong and durable, so the bottom of the tail plate does not need to install the hanging bumper to protect the cylinder.

7. The circuit is equipped with a safety protection system. When the tail plate rises to the level of the car, the circuit is automatically cut off.

Basic parameters of the three-energy tail plate:

Lifting weight: 300 kg / 500 kg / 1000 kg / 1500 kg / 2000 kg / 2500 kg /

Descent speed: 0.07 m/s.

Rising speed: 0.07 m/s.

Tilt Angle: maximum adjustable from vertical to 118 degrees.

Electric voltage: 12 v / 24 v, 48 v / 72 v / 220 v / 380 v

Electric source: car battery capacity shall not be less than 160AH(amp)

The system pressure: 10 mpa / 12 mpa / 16 mpa / 18 mpa / 22 mpa

The motor power: 800 w / 1200 w / 1500 w / 2200 w / 2500 w3000w


The serial numberProduct categoryThe plate materialArm lengthArms widemodel

Main dimensions

(height * width)

Bearing the weight
1Automobile tail plateManganese steelShort armBroad arm/narrow arm3NWB-05SC12/241100*1300500KG
2Manganese steelShort armBroad arm/narrow arm3NWB-10SC12/241700*18001000KG
3Manganese steelShort armBroad arm/narrow arm1800*18001000KG
4Manganese steelShort armBroad arm/narrow arm3NWB-15SZC12/24
3NWB-15LZC12/24
3NWB-15SZK12/24
3NWB-15LKC12/24
1700*18001500KG
5Manganese steelShort armBroad arm/narrow arm1800*18001500KG
6Manganese steelShort armBroad arm/narrow arm1800*19001500KG
7Manganese steelShort armBroad arm/narrow arm1800*20001500KG
8Manganese steelShort armBroad arm/narrow arm1800*20601500KG
9Manganese steelShort armBroad arm/narrow arm1800*21301500KG
10Manganese steelShort armBroad arm/narrow arm1800*22101500KG
11Manganese steelShort armBroad arm/narrow arm1800*23401500KG
12Manganese steelShort armBroad arm/narrow arm1800*24501500KG
13Manganese steelShort armBroad arm/narrow arm3NWB-20SZC24
3NWB-20LZC24
3NWB-20SKC24
3NWB-20LKC24
1700*18002000KG
14Manganese steelShort armBroad arm/narrow arm1800*18002000KG
15Manganese steelShort armBroad arm/narrow arm1800*19002000KG
16Manganese steelShort armBroad arm/narrow arm1800*20602000KG
17Manganese steelShort armBroad arm/narrow arm1800*21302000KG
18Manganese steelShort armBroad arm/narrow arm1800*22102000KG
19Manganese steelShort armBroad arm/narrow arm1800*23402000KG
20Manganese steelShort armBroad arm/narrow arm1800*24502000KG
21Manganese steelShort armBroad arm/narrow arm3NWB-25C241800*20002500KG
22Manganese steelShort armBroad arm/narrow arm1800*21302500KG
23Manganese steelShort armBroad arm/narrow arm1800*22102500KG
24Manganese steelShort armBroad arm/narrow arm1800*23402500KG
25Manganese steelShort armBroad arm/narrow arm1800*24502500KG


posts:notNext:not
Product
SanNeng car tail board is a kind of cantilever loading and unloading device, which is installed in trucks and all kinds of airtight vehicle tail, is about 300 to 600 kg of lift platform, based on on-board battery powered hydraulic lifting handling equipment. It has all the functions of loading and unloading of motor forklifts, and all the motors, valves, high-pressure pumps, oil cylinders, lifting devices and control switches on the forklift. It can greatly improve the efficiency of transportation and handling, and the three-energy tail plate is one of the necessary equipment for modern logist...
400-0268-999
(24-hour national service hotline)
Copyright ©2002 - 2018 Shenzhen sanpower electromechanical equipment co. LTD.
犀牛云提供云计算服务
Follow Us:
X
3

SKYPE 设置

4

阿里旺旺设置

5

电话号码管理

  • 4000-268-999
6

二维码管理

展开