Guidance on correct operation of hydraulic adjustment plate of logistics storage loading and unloadi

The correct operation of the hydraulic adjustment plate of the logistics storage loading and unloading platform guides the logistics storage loading and unloading platform with only a single operation, which can realize the safe and fast loading and unloading of the goods. The loading and unloading platform is hydraulically driven and the operation is simple and convenient. It can flexibly connect the cargo bed with the freight cars of different heights, so that the loading and unloading and handling vehicles can enter and exit the freight cars unhindered unhindered. The height is high and the stability is good!

The hydraulic adjustment plate of the unloading platform is composed of a panel, a slab, an underframe, a mechanical jack, a hydraulic transmission system, and electrical control.

Operation guide for height adjustment plate of loading and unloading platform:

Please read the manual carefully before use, and it must be turned on by a designated person. It is not allowed to be used by people without professional knowledge; it is not allowed to arbitrarily adjust the working pressure of the hydraulic system. When the frequency of use is too high and frequent operation, if it encounters a fault, it cannot be disassembled and assembled without permission. You need to call the manufacturer's professional personnel for repair.

1. Ascent process: Press and hold the power button, the blower works, the air bag begins to inflate, and the adjustment plate starts to rise.

2. Working process: When the adjustment plate rises to the highest position, release the button, the adjustment plate descends, the loose-leaf flap is opened under the action of the push rod, and it is placed behind the rear floor of the truck (over 15cm). use. (If the position of the truck floor is lower than the level of the cargo bed, during the fall, pull the iron chain until the small board is placed on the truck floor.)

3. End process: When the goods are loaded, press and hold the power button, lift the large board, and the small board automatically resets. When the large board is raised to a certain height, then release the button, the adjustment board is slowly reset under the effect of its own weight.