News News

A good helper for working at heights The best partner for aluminum alloy lifting platform

Data: 2019-06-27
time: 2

The aluminum alloy elevator is made of high-strength and high-quality aluminum alloy profiles. It has the advantages of beautiful appearance, small size, light weight, balanced lifting, safe and reliable, good stability, flexible operation and convenient implementation. It can be used in general halls and elevators. It is widely used in factories, hotels, shopping malls, buildings, stations, airports, etc. It is also the best equipment for power line maintenance, equipment maintenance, paint decoration, high-altitude cleaning or household use.


A good helper for working at heights The best partner for aluminum alloy lifting platform


The aluminum alloy lifting platform has good working stability and strong carrying capacity of the supporting structure; the overall lifting guardrail device is suitable for no more than two people to climb the work at the same time, and the loading and unloading is very convenient. Its lightweight appearance allows for maximum lift in a limited space and can be assembled or disassembled in one lift. The aluminum alloy lifting platform can also be customized into various non-standard products according to different environments to meet different needs.


The aluminum alloy lifts will complete all inspections and commissioning before leaving the factory. All the indicators can be delivered to the factory. When using, just turn on the power and follow the instructions.


So how to use the aluminum alloy lifting platform correctly? Please note the following points:

1. Check whether there is any difference in the lifting platform before use, such as whether the line is damaged or not, whether the supporting foot is loose or not;

2. must be placed on a hard and flat ground (can not have a slope) to prevent tipping during work.

3. Move the lifting platform to the working place, turn on the power supply, and open the supporting legs of the lifting platform to achieve the level;

4. Open the electrical control switch of the lifting platform to check whether the power is turned on; press the “up” or “down” button to lift the workbench. If the workbench does not move, stop the operation immediately for inspection.

5. During the lifting process, if the lift sound is abnormal, the power supply check should be turned off immediately to avoid damage to the equipment;

6. The operator carries the tool into the interior of the lifting platform and must close the protective door;

7. Lifting and lowering operations are carried out by the lifting button of the lifting platform control handle.

8. Check the working status of the shaft pin regularly every month. If the shaft pin and the screw are loose, be sure to lock it to prevent the shaft pin from falling off and causing an accident.

9. The hydraulic oil should be kept clean and replaced every 5 to 6 months (if the hydraulic oil is found to be black in the middle, it needs to be replaced immediately);

10. When servicing and cleaning the lift, be sure to support the safety poles.


The variety of aluminum alloy aerial work platforms is mainly divided into single-type aluminum alloy lifting platform, double-turn aluminum alloy lifting platform, three-inch aluminum alloy lifting platform and four-inch aluminum alloy lifting platform. Depending on the application, the profiles for the lifting platform are also available in steel, such as scissor-type aerial work platforms and vehicle-mounted high-altitude lifting platforms.


Correlation
The straight-top lifting platform, also called the rail-type lifting platform (referred to as the “lifting machine”), is a simple lifting machine for vertical lifting operations (also called lifting f...
2019 - 09 - 15
The boarding bridge is mainly divided into fixed boarding bridge and mobile boarding bridge. According to the place of use and requirements, the fixed boarding bridge is divided into hydraulic boardin...
2019 - 09 - 01
The straight-track lifting platform is a simple lifting freight elevator for vertical lifting operation. After the hydraulic cylinder is lifted to the target height, it is automatically leveled with t...
2019 - 08 - 23
Scissor lifts, also known as scissor hydraulic lifting platforms, are often classified into fixed and mobile. They are vertical lifts for high-altitude equipment for indoor and outdoor work. It is wid...
2019 - 08 - 11
In recent years, aluminum alloy tailgates have become more and more popular, because the aluminum tailgate effectively reduces the weight of the tailgate. The surface of the aluminum alloy is 150-200k...
2019 - 07 - 30
400-0268-999
(24-hour national service hotline)
Copyright ©2002 - 2018 Shenzhen sanpower electromechanical equipment co. LTD.
犀牛云提供云计算服务
Follow Us:
X
3

SKYPE 设置

4

阿里旺旺设置

5

电话号码管理

  • 4000-268-999
6

二维码管理

unfold