Address：Tianpeng industrial park, Hu community, Guanlan Street, Longhua new district, Shenzhen City, China
The equipment uses a hydraulic oil tank, a single piece and a rope workbench. When they rise to the target height, they automatically switch to the reference level and work with light and light. As the main driving force, the hoisting car is used as the main driving force. With the help of powerful chain and cable transmission, the safety of the machine is ensured.
In this case, such as the construction of basements, warehouses, warehouses, and to ensure safety, convenience and convenience. before use:
1. The inspection and testing are carried out before the machine enters. All technical specifications are carried out in accordance with the design requirements. The user must read the manual carefully and follow strict measures.
2. Non-professionals cannot adapt to hydraulic system, electrical control system and platform structure.
3. When installing the platform, you must carefully check whether the hydraulic pressure, electrical appliances, and structural parts are normal. This step also applies after the tablet has recovered.
4. There is an indicative structure on the platform, a carefully checked boot structure, the purpose of which is to ensure that they can be debugged. Unable to load platform. The staff shall ensure that the cargo controlled by the cargo transportation is not allowed to be overloaded, overloaded, not overloaded, and it is strictly forbidden to transport people in flammable and combustible dangerous environments. Climbing. According to the installation of the cargo ladder and the setting of the conditions of use, different specifications can be selected to choose different options, so that a very good combination can be achieved to achieve more effective use.
After they use the elevator:
1. If the operator is changed, the new operator should carefully check the experience and read the instructions. If there is a problem, contact the relevant department in time.
2. Related to the negative lift load: a load should be placed in the center of the table. The sturdy structure of products that carry high loads has been increased and stabilized, and it has been installed as a convenient and convenient device to be used as an alternative elevator to replace the elevator. According to the setting of the installation and use conditions of the hoisting platform, various fixed hydraulic elevators can be selected, and different options and closures can be selected to improve the efficiency of use. In particular, if there are size requirements, a fixed dual-transport hydraulic hoist can be used, which has two services, capacity and capacity, and is mainly used for vehicle maintenance, in furnaces, chemical plants, equipment, etc.
three. Upgrade operation: a brief summary of the operation: the operation mode using the automatic operating system should be executed by pressing the button, executable, and then automatically terminated. The realization of these functions is realized by exchanging contacts and using electrical appliances. Pay attention to the situation during the upgrade process
When they press the button, they should comply. a. Whether the load is placed in the center of the workbench, otherwise, the requirements of the staff should be adjusted appropriately. b. After pressing the Anton button, the watch will act appropriately, otherwise, press the "Stop" button immediately to check whether the power cord is missing phase and burn the machine.
Fixed hydraulic lift: a special hydraulic lift used for transporting goods between floors of buildings. The products are mainly used for transportation of goods between various working floors; three-dimensional garages and underground garages are used for car lifts between floors. The hydraulic system of the product is equipped with anti-falling and overload safety protection devices, and operation buttons can be set on each floor and elevator work surface to realize multi-point control.
The product features of fixed hydraulic elevator: The product has a solid structure, a large lifting platform with a large carrying capacity, stable lifting, simple installation and maintenance, and it is an economical and practical low-floor alternative to the ideal cargo conveying equipment for elevators. According to the installation environment and use requirements of the lifting platform, choose different optional configurations to achieve better use results.
The working principle of the fixed hydraulic elevator: the hydraulic oil is formed by the vane pump to a certain pressure, and enters the lower end of the hydraulic cylinder through the oil filter, the flameproof electromagnetic reversing valve, the throttle valve, the hydraulic control check valve, and the balance valve. The piston of the cylinder moves upward to lift the weight. The oil return from the upper end of the cylinder is returned to the tank through the flameproof electromagnetic reversing valve. The rated pressure is adjusted by the overflow valve, and the reading value of the pressure gauge is observed through the pressure gauge.
Fixed hydraulic lifting platform products The hydraulic lifting system is generally equipped with safety protection devices such as fall prevention, overloading, power failure, etc., rail-type external power unit, and the entrance of the table adopts hanging chains or cross bars, guardrails and warning lights or warnings of the hydraulic lifting platform The bell, when the door is opened, use the safety switch to close the circuit of the lifting platform, and many other functions are greatly convenient for the operator to multi-point control, inching and safe mode operation of the working layer. The product has strong structure, large carrying capacity, stable lifting, simple and convenient installation and maintenance. It is an economical and practical low-floor room to replace elevators. Ideal cargo transportation equipment. According to the installation environment and use requirements of the lifting platform, different fixed hydraulic lifting platforms can be selected. Choose different optional configurations to complete the task of lifting items and achieve better results. If the size required for use is large, the fixed double-span hydraulic lift can be used, and the double-span lift has a large load capacity and is simple to operate. It is widely used in automobile maintenance, chemical plant equipment and other industries.