structure classification

contact

E-mail:sale@3nnn.com

Address:Tianpeng industrial park, Hu community, Guanlan Street, Longhua new district, Shenzhen City, China

Vertical truck tail lift

Vertical truck tail lift

The Sanneng brand steel truck tail lift is a cantilevered loading and unloading device, which is installed at the tail of trucks and various enclosed vehicles. It is a lifting platform weighing about ...

E-mail:sales@3nnn.com
Parameters

The Sanneng brand steel truck tail lift is a cantilevered loading and unloading device, which is installed at the tail of trucks and various enclosed vehicles. It is a lifting platform weighing about 300 to 600 kg. It is a hydraulic lifting loading and unloading equipment powered by an on-board battery. It has all the functions of loading and unloading of a motorized forklift, and all the motors, valve blocks, high-pressure pumps, cylinders, lifting devices, control switches and other steel truck tail lifts on the forklift. Mounting the tail lift of the Sanneng steel truck can greatly improve the efficiency of transportation and loading and unloading. The tail lift of the Sanneng steel truck is one of the necessary equipment for modern logistics transportation. It has all the functions of loading and unloading of a motorized forklift, and all the motors, valve blocks, high-pressure pumps, cylinders, lifting devices, control switches and other steel truck tail lifts on the forklift. The tail lift of the Sanneng steel truck can greatly improve the efficiency of transportation and loading and unloading. The tail lift of the Sanneng steel truck is one of the modern logistics transportation equipment.

Greatly improve the efficiency of loading and unloading. If an 8-ton truck is filled with goods, it will take 5-8 hours if it is handled manually. If the tail lift of the Sanneng steel truck is used, it will only take half an hour, and the personnel must save 80%. The staff can purchase a steel truck tail lift with half a year's salary.

The tail lift of Sanneng steel truck has the following characteristics:

1. The hydraulic cylinders are all nickel-plated pistons and dust-proof rubber sleeves.

2. The hydraulic station has a built-in flow control valve, which can adjust the lifting and turning speed.

3. Built-in three protection switches, when the car circuit is short-circuited, the battery voltage is too low or the current is too large, and the steel truck tail lift is overloaded, it can effectively avoid the circuit or the motor from burning.

4. An explosion-proof safety valve can be built in the hydraulic cylinder according to the customer's requirements, which can prevent the tail lift of the steel truck and the cargo from being damaged when the oil pipe bursts.

5. All are equipped with anti-collision bars to separate the tail lift of the steel truck from the tailgate of the carriage to avoid damage caused by long-term collision of the tailgate of the carriage.

6. All oil cylinders of Sanneng steel truck tail lift are thickened oil cylinders, which are strong and durable. Therefore, there is no need to install suspension bumpers at the bottom of steel truck tail lifts to protect the oil cylinder.

7. The circuit is equipped with a safety protection system, and the circuit is automatically cut off when the elevator at the rear of the steel truck rises to the level of the carriage.

Basic parameters of the tail lift of Sanneng steel truck:

Lifting weight: 500KG/1000KG/1500KG/2000KG/2500KG

Descent speed: 0.07 m/s

Ascent speed: 0.07 m/s

Tilt angle: It can be adjusted to 118 degrees from the vertical direction.

Voltage: 12V/24V/48V/72V/220V/380V

Power source: The capacity of the car battery should not be less than 160AH (Ah)

System pressure: 10Mpa/12Mpa/16Mpa/18Mpa/22Mpa

Motor power: 1200W/1500W/2200W/2500W/3000W