vehicle classification

contact

E-mail:sale@3nnn.com

Address:Tianpeng industrial park, Hu community, Guanlan Street, Longhua new district, Shenzhen City, China

4.2m truck tail lift

4.2m truck tail lift

The Sanneng truck tail lift is a cantilevered loading and unloading device, which is installed at the tail of trucks and various enclosed vehicles. It is a lifting platform weighing about 300 to 600 k...

E-mail:sales@3nnn.com
Parameters

The Sanneng truck tail lift is a cantilevered loading and unloading device, which is installed at the tail of trucks and various enclosed vehicles. It is a lifting platform weighing about 300 to 600 kg. It is a hydraulic lifting loading and unloading equipment powered by on-board batteries. It has all the functions of loading and unloading of a motorized forklift, and all the motors, valve blocks, high-pressure pumps, oil cylinders, lifting devices, control switches and other truck tail lifts on the forklift are all available. Mounting the tail lift of the Sanneng truck can greatly improve the efficiency of transportation and loading and unloading. The tail lift of the Sanneng truck is one of the necessary equipment for modern logistics transportation. It has all the functions of loading and unloading of a motorized forklift, and all the motors, valve blocks, high-pressure pumps, oil cylinders, lifting devices, control switches and other truck tail lifts on the forklift are all available. The tail lift of the Sanneng truck can greatly improve the efficiency of transportation and loading and unloading. The tail lift of the Sanneng truck is one of the modern logistics transportation equipment.

Greatly improve the efficiency of loading and unloading. If an 8-ton truck is filled with goods, it will take 5-8 hours if it is carried by human power. If the tail lift of the Sanneng truck is used, it will only take half an hour, and the personnel must be saved by 80%. You can buy a truck tail lift with half a year's salary.

The tail lift of Sanneng truck has the following characteristics:

1. The hydraulic cylinders are all nickel-plated pistons and dust-proof rubber sleeves.

2. The hydraulic station has a built-in flow control valve, which can adjust the lifting and turning speed.

3. Built-in three protection switches, when the car circuit is short-circuited, the battery voltage is too low or the current is too large, the tail lift of the truck is overloaded, etc., it can effectively avoid the circuit or the motor from burning.

4. An explosion-proof safety valve can be built in the hydraulic cylinder according to the customer's requirements, which can prevent the tail lift of the truck and the cargo from being damaged when the oil pipe bursts.

5. All are equipped with anti-collision bars to separate the rear lift of the truck from the tailgate of the carriage to avoid damage caused by long-term collision of the tailgate of the carriage.

6. All oil cylinders of Sanneng truck tail lift are thickened oil cylinders, which are strong and durable, so there is no need to install a suspension bumper at the bottom of the truck tail lift to protect the oil cylinder.

7. The circuit is equipped with a safety protection system, and the circuit is automatically cut off when the lift at the rear of the truck rises to level with the carriage.

Basic parameters of Sanneng truck tail lift:

Lifting weight: 300KG/500KG/1000KG/1500KG/2000KG/2500KG

Descent speed: 0.07 m/s

Ascent speed: 0.07 m/s

Tilt angle: It can be adjusted to 118 degrees from the vertical direction.

Voltage: 12V/24V/48V/72V/220V/380V

Power source: The capacity of the car battery should not be less than 160AH (Ah)

System pressure: 10Mpa/12Mpa/16Mpa/18Mpa/22Mpa

Motor power: 800W/1200W/1500W/2200W/2500W/3000W